OEM Portable Handheld XRF Alloy Analyzer For Metal Identification And PMI
Product Details
| Spectral Bandwidth: | N/A | Product Type: | Handheld XRF Alloy Analyzer |
|---|---|---|---|
| Customized Support: | OEM | Warranty: | 1 Year |
| Analytical Method: | Energy Dispersive X Ray Fluorescence Analytical Method | Simultaneous Detector Elements: | Simultaneous Analysis 40 Elements |
| Display Screen: | 5 Inch HD Display Screen, Supports Multi-touch With 2 Or More | The Detection Time: | 1 To 60 Seconds (a Second Report Results) |
| Power Supply: | Li Battery, Standard Is 9000mAh, Sustainable Work Up To 8 12 Hours; | Elements Measuring Range: | Atomic From 12 To 92 [elements From Magnesium(Mg) To Uranium(U) |
| Detection Objective: | Solid, Liquid, Powder | Detector: | Fast-SDD Detector |
| Detector Resolution: | Minimum Can Reach 125eV | Main Application: | Alloy Identification And PMI |
| Connectivity: | 4G, Wi-Fi, Bluetooth And GPS | ||
| Highlight |
OEM Handheld XRF Alloy Analyzer,Portable Handheld XRF Alloy Analyzer,xrf handheld metal alloy analyzer |
||
Product Description
The Explorer 5000 Handheld XRF Alloy Analyzer provides rapid, non-destructive elemental analysis and alloy identification on site. It helps users verify incoming materials, check alloy grades and sort scrap metals without cutting or damaging the tested item. Its portable design is suitable for inspections in warehouses, workshops and recycling facilities.
Explorer 5000 is a handheld energy-dispersive X-ray fluorescence (XRF) analyzer designed for metal and alloy testing. It measures elemental composition and supports positive material identification (PMI), helping users check whether a metal part matches the required material grade.
The analyzer can be used with stainless steel, low-alloy steel, tool steel, nickel alloys, cobalt alloys, titanium alloys, copper alloys and other materials listed in the product catalogue. It is useful when similar-looking metals need to be identified quickly, such as during incoming inspection, production, equipment maintenance or scrap sorting.
For routine testing, the operator positions the instrument against a suitable sample surface and starts the measurement. The handheld design makes it practical to move between parts that are difficult to take to a laboratory. A built-in camera helps locate the test area, while the touchscreen and dedicated alloy analysis software support on-site operation.
Measurement results depend on the alloy, surface condition, test time and selected method. Surfaces with coatings, corrosion or contamination may need suitable preparation before testing. Where a material decision requires formal certification, use the appropriate confirmatory test and documentation.
- Incoming material inspection: Verify metal and alloy materials before production.
- Positive material identification (PMI): Check the alloy grade of components, pipes and other parts on site.
- Manufacturing quality control: Help identify mixed or incorrectly labeled materials during processing.
- Scrap metal recycling: Sort and classify different metals and alloys for reuse.
- Equipment maintenance: Check the material of installed components during inspection or repair.
- Industrial supply chains: Support alloy checks in machinery, shipbuilding, aerospace and pressure equipment applications.
| Parameter | Specification |
|---|---|
| Model | Explorer 5000 |
| Product type | Handheld XRF alloy analyzer |
| Analytical method | Energy-dispersive X-ray fluorescence (EDXRF) |
| Measurable element range | Magnesium (Mg) to uranium (U), atomic numbers 12-92 |
| Simultaneous analysis | Up to 40 elements |
| Content range | ppm to 99.99% |
| Measurement time | 1-60 seconds |
| Detection limit | 1-500 ppm, depending on the element and sample |
| Sample types | Solids, liquids and powders |
| Detector | Fast SDD detector |
| Detector resolution | Down to 125 eV |
| X-ray source | 50 kV / 200 μA miniature X-ray tube with Rh target |
| Collimators | 2.0 mm and 4.0 mm |
| Filters | 6 filters with automatic switching |
| Camera | 8-megapixel camera |
| Display | 5-inch HD touchscreen |
| Analysis software | Alloy elemental analysis and coating analysis modules |
| Connectivity | 4G, Wi-Fi, Bluetooth and GPS modules |
| Standard battery | 9,000 mAh rechargeable lithium battery |
| Battery operating time | Up to 8-12 hours, as stated in the catalogue |
| Power adapter | AC 110-220 V |
| Instrument weight | Less than 2 kg |
| Status indicators | Green: powered on; flashing red: testing; flashing yellow: fault |
| Optional accessory | Purpose |
|---|---|
| 27,000 mAh high-capacity battery | Extends operating time during field testing |
| Portable test stand | Supports the analyzer during on-site testing |
| Benchtop test stand | Holds the analyzer for stationary testing |
| Bluetooth printer | Prints test reports on site |
| Powder sample cups | Holds prepared powder samples for testing |
| Liquid sample cups | Holds suitable liquid samples for testing |
Product Highlights
Handheld XRF Alloy Analyzer for Metal Identification and PMI Quick Detail The Explorer 5000 Handheld XRF Alloy Analyzer provides rapid, non-destructive elemental analysis and alloy identification on site. It helps users verify incoming materials, check alloy grades and sort scrap metals without ...
0–30000 mg/L Environmental TOC Analyser With High Temperature Catalytic Combustion
Environmental TOC Analyzer with High-Temperature Catalytic Combustion RT2201E Environmental TOC Analyzer Designed for Total Organic Carbon (TOC) analysis in environmental and industrial water applications Suitable for wastewater, surface water, groundwater and industrial process water testing High...
Constant Temperature Incubator with 304 Stainless Steel Chamber, Upper Control Panel, 125/210/640/1200 L
Product Overview The RHP-9125C and RHP-9210C are electrically heated constant temperature incubators with capacities of 125 L and 210 L. They provide a controlled heated environment for routine laboratory incubation and sample conditioning within the specified temperature range. The upper-mounted ...
Forced Air Constant Temperature Incubator Equipment With 304 Stainless Steel Chamber 45/72L
Forced Air Constant Temperature Incubator with 304 Stainless Steel Chamber 45/72L Product Overview The Forced Air Constant Temperature Incubator is designed for controlled heating and constant-temperature applications in laboratories. Available in 45 L and 72 L capacities, it features forced air ...
Large Capacity Electric Heating Laboratory Incubator Equipment 125/210L
Large Capacity Electric Heating Laboratory Incubator 125/210L Product Overview The Large Capacity Electric Heating Laboratory Incubator is designed for constant-temperature heating applications in laboratories. Available in 125 L and 210 L capacities, it features a digital temperature controller, ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
